BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ РКПП and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   + Дигностика electric elements
   - Illumination and the alarm system
      Removal and installation/check of a sound signal
      Remote control initialization
      Replacement of lamps накаливания external illumination
      Replacement of lamps накаливания internal illumination
      Removal and headlight installation
      Removal and installation of a ring cover of a headlight
      Removal and installation of the electric motor of adjustment of range of light
      Adjustment of headlights
      Gas-discharge lamps of a passing light (the xenon lamps)
      Removal and installation of a back lantern
   + Devices and the equipment
+ Electric equipment schemes


Смотри здесь система вызова.|Установка пожарной сигнализации, охранная и пожарная сигнализация в домодедово.



Removal and installation of the electric motor of adjustment of range of light

 REMOVAL

1 Remove a headlight, address to Section Removal and headlight installation.
2 Disconnect a ring cover.

3 Remove consolidations of the block of a headlight.

4 Wring out the block of a headlight from three spherical heads (two heads for manual adjustment-1 and one for adjustment of range of light-2) and take out it. Consolidations are thus pressed through together.

5 Rasstykujte a socket-4.
6 Turn away bolts of fastening of the electric motor of adjustment of range of light-3 and take out it.


 INSTALLATION

7 Insert the electric motor of adjustment of range of light and fix it.
8 Join a socket.
9 Establish the headlight block through consolidations, опрев it on three spherical heads.
10 Put on consolidations the headlight block.
11 Insert the headlight block into a ring cover and fix.
12 Fix a sealing framework-1.
13 Establish a headlight and adjust it, address to Section Adjustment of headlights.
14 Establish a turn signal, address to Section Replacement of lamps накаливания external illumination.