BMW 3 series E46

Since 1998 of release

Repair and car operation

The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
- The engine
   - Procedures of repair of the engine
      Removal and installation of the bottom cover of an impellent compartment
      Removal and installation of a box of an air inlet
      Compression check
      Removal and installation of the inlet pipeline
      Removal and installation of a head of cylinders / replacement of a sealing lining
      Removal and installation of camshafts
      Removal and installation of the vacuum pump
      Removal, installation and tension клинового a belt
   + System of greasing of the engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes

Removal and installation of a box of an air inlet

The air inlet box is necessary for removing, if it is required to uncover heads of cylinders or the inlet pipeline.


1 Remove an element of the air filter of ventilation of salon, a heater and the conditioner.

2 Open the cable channel at the bottom part воздухосборной boxes-2 and take out cables.

3 Turn out bolts-1 and remove the bottom part воздухосборной boxes-2.


1 Fix bolts the bottom part воздухосборной boxes.
2 Enclose cables in the cable channel at the bottom part воздухосборной boxes. Fix the cable channel.
3 Establish filtering element of a heater and the conditioner, address to Section Replacement of an element of the filter of air of salon.