BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
- Engine electric equipment
   The general information and security measures
   + System of electronic control by ignition and injection of the petrol engine
   - Ignition system
      Spark plugs
      Removal and installation of coils of ignition / of cables of ignition
      Check of the moment of ignition
   + System of preheat of the diesel engine
   + Charge and start systems
+ РКПП and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of coils of ignition / of cables of ignition

Models 316i, 318i

 REMOVAL

1 Rasstykujte штекерные connections of spark plugs for what turn to the left a regulator-1.

2 Turn away 2 nuts of fastening of coils of ignition to the holder and remove coils.
3 Mark a tape ignition cables not to mix them. The cylinder 1 is ahead in a movement direction. Disconnect cables from the bottom party of coils of ignition.
4 Disconnect cables at spark plugs.


 INSTALLATION

5 Join cables of ignition with candles.
6 Join cables of ignition with coils in the bottom part, observing marks.
7 Fix coils of ignition by two nuts to the holder.
8 Join штекерные connections of coils of ignition and fix маховичками.