BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   + Дигностика electric elements
   + Illumination and the alarm system
   - Devices and the equipment
      Monitors - the basic data
      Removal and control panel installation
      Removal and installation of the index of turn/switch of a screen wiper
      Removal and installation of facing of a steering column
      Removal and installation of the switch of light
      Removal and installation of switches: seat heating / sun-protection curtain/system Hi-Fi/antiprobuksovochnoj of system ASR
      Removal and installation of switches: the alarm system, the uniform lock, window lifters
      Removal and radio receiver installation
      Removal and loudspeaker installation
      Removal and installation of the electric motor/draughts of a screen wiper
      Pump check стеклоомывателя
      Explanatory remarks to schemes of electric connections
+ Electric equipment schemes





Removal and installation of the switch of light

 REMOVAL

1 Remove the left forward peak, address to Section Removal and installation of forward peaks of the panel of devices.

2 Disconnect the switch-1 (arrows on an illustration).

The switch can be fixed one or two screws. 2 – directing.

3 Wring out the switch at directing-2 upwards, disconnect from фиксаторных pads-3 and take out.

4 Rasstykujte a socket-4 also remove from the switch-1. For this purpose disconnect a collar-5 and take away it from a cable.


 INSTALLATION

5 Join a socket and fix its collar. Watch that the collar was fixed.
6 Press the switch into an aperture on the panel of devices and fix.
7 Fix the switch above one or two screws.
8 Establish the left forward peak, address to Section Removal and installation of forward peaks of the panel of devices.