BMW 3 series E46
Since 1998 of release
Repair and car operation
The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
Removal and installation brake колодок forward wheels
Removal and installation directing forward brakes
Removal and installation of a brake disk of a forward wheel
Removal and installation brake колодок disk brakes
Removal and installation скобы brakes of back wheels
Removal and installation of a brake disk of a back wheel
Measurement of a thickness of a brake disk
Brake liquid - the basic data and security measures
Removal of air from brake system
Replacement of the brake pipeline
Replacement of a forward brake hose
Check of the amplifier of a brake
Removal and installation колодок a lay brake
Adjustment of a lay brake
Removal and installation of the lever of a lay brake
Removal and installation of a cable of a drive of a lay brake
Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Onboard electric equipment
+ Electric equipment schemes
Check of the amplifier of a brakeCheck up work of the amplifier of a brake if for achievement of necessary braking it is required to put excessively big effort to a brake pedal.
1 At the idle engine press a pedal of a brake not less than 10 times, then at the pressed pedal start the engine. Now the brake pedal should move aloud. In this case the amplifier is serviceable.
2 Otherwise disconnect a vacuum hose at the amplifier and start the engine. Put a finger to the end of a hose and check up, whether there is a vacuum.
3 If the vacuum is not present: Check up a vacuum hose on tightness and presence of damages, if necessary replace it. Tighten fastening of all collars.
4 Diesel engine: Disconnect a vacuum hose from the vacuum pump and check up a finger, whether there is a vacuum. The vacuum pump is fixed to a head of cylinders.
5 If the vacuum is available: Measure value of vacuum, if necessary replace the brake amplifier (work HUNDRED).