BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation brake колодок forward wheels
   Removal and installation directing forward brakes
   Removal and installation of a brake disk of a forward wheel
   Removal and installation brake колодок disk brakes
   Removal and installation скобы brakes of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of a thickness of a brake disk
   Brake liquid - the basic data and security measures
   Removal of air from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation колодок a lay brake
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of a cable of a drive of a lay brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of the lever of a lay brake

 REMOVAL

1 Remove the central console, address to Section Removal and installation of the central console.

2 Completely turn away a counternut and adjusting nuts of cables of a lay brake.
3 Disconnect an electric wire from the switch of a lay brake-1 for what press spring clips.

4 Turn away screws of fastening and remove the brake lever.


 INSTALLATION

5 Enter cables into the lever of a lay brake, insert a brake and fix its screws.
6 Screw by hand nuts of cables of a brake.
7 Adjust a lay brake, address to Section Adjustment of a lay brake.
8 Include ignition. The control lamp of a lay brake should go out. If it does not occur, adjust in appropriate way the lamp switch.
9 Establish into place the central console, address to Section Removal and installation of the central console.