BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation brake колодок forward wheels
   Removal and installation directing forward brakes
   Removal and installation of a brake disk of a forward wheel
   Removal and installation brake колодок disk brakes
   Removal and installation скобы brakes of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of a thickness of a brake disk
   Brake liquid - the basic data and security measures
   Removal of air from brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation колодок a lay brake
   Adjustment of a lay brake
   Removal and installation of the lever of a lay brake
   Removal and installation of a cable of a drive of a lay brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of a cable of a drive of a lay brake

 REMOVAL

1 Remove the brake lever, address to corresponding section.
2 Remove колодки a lay brake, address to corresponding section.

3 Remove the lock колодок brakes, for this purpose take out a finger-1.

4 Turn away bolts-3 and remove a support of a cable of a brake.
5 Disconnect a cable and extend it from a protective tube.


 INSTALLATION

1 Lay a cable to the lever of a brake and to a back brake.

Inserting a cable into a protective tube, watch that the cable support adjoined to a protective tube.

2 Connect a cable to a plastic clip.

3 Insert a cable support into a cable and fix at a board of a brake two bolts-2.

4 Collect a lay brake, address to Section Removal and installation колодок a lay brake.
5 Establish the brake lever, address to corresponding section.
6 Adjust a brake, address to corresponding section.