BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the panel of devices
      Removal and facing installation forward parts of area of feet
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of a drive сдвижной roof panels
      Removal and installation of a mirror of an interior
      Mirror of an interior with automatic blackout
      Removal and installation of lateral facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a cover of a luggage carrier
      Removal and installation of a headrest of a forward seat
      Натяжитель a seat belt. The basic data and security measures
      Removal and installation of a forward seat
      Removal and installation of a back seat
      Removal and installation of atomizers стеклоомывателя
      Adjustment of atomizers стеклоомывателя
      Removal, installation and check of atomizers фароомывателя
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of the tank/pump of a washer

The tank with pumps glass - and фароомывателя

1 — the washer tank
2 — a grid
3 — a cover
4 — the pump фароомывателя
5 — a grid
6 — the pump стеклоомывателя

7 — a grid
8 — the level gauge
9 — the heat-shielding screen
10 — саморез
11 — a nut


 REMOVAL

1 Turn away bolts of fastening of the tank-1 to the left amortisation rack-2 and take out from bottom directing-3.

2 Rasstykujte a socket of the pump of a washer.

Attention: If it is necessary to replace only the pump, leave the tank in an impellent compartment. Prepare the new pump. Take out the pump from the tank and cover an aperture with a finger. At once put in an aperture on the tank the new pump.

3 Merge water from the tank in the corresponding capacity.
4 Remove a hose and take out the tank.
5 Take out the pump from the tank.


 INSTALLATION

3 Merge water from the tank in the corresponding capacity.
4 Remove a hose and take out the tank.
5 Take out the pump from the tank.