|
4 Establish into place the block the electric motor - a reducer and attach it. Fix it slightly the moment 3 НЧм two short screws-2 and one long-1. Necessarily establish new screws. If it is impossible, grease screws preliminary with means for fixing of carving connections, for example, Loctite 270.
5 Join a socket of the switch of a drive, establish a cover.
Initialization сдвижной panels
6 Establish сдвижную the panel in position of lifting and then press the switch сдвижной panels further in a direction “lifting Position”.
7 Hold the switch 5 with in position of lifting after:
- Each interruption of a food or
- Roof adjustments.
8 Hold the switch 20 with in position of lifting after:
- Malfunctions in work
- Detachments of a drive or
- Works with тросовыми draughts.
9 Initialization is considered finished if сдвижная the panel once again is shortly pressed in a direction “lifting Position” (click). |