BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a forward bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a back bumper
      Removal and installation of the back shock-absorber
      Removal and cover installation обтекателя
      Removal and installation of a forward wing
      Removal and cowl installation
      Cowl adjustment
      Removal and installation of a cover of a luggage carrier
      Adjustment of a cover of a luggage carrier
      Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier
      Removal and installation газонаполненного an emphasis of a cowl/cover of a luggage carrier
      Replacement молдингов and model emblems
      Removal, installation and door adjustment
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and window adjustment
      Removal and installation electric стеклоподъемника
      Removal and electric motor installation стеклоподъемника
      Removal and installation of a mirror of an external kind / a sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier

 REMOVAL

1 Remove facing of a cover of a luggage carrier, address to Section Removal and installation of facing of a cover of a luggage carrier.
2 Remove the holder of a lamp of the right back lantern, address to Section Replacement of lamps накаливания external illumination.
3 Disconnect a cable of a back lantern at a cover of the cylinder of the lock.

4 Turn away two screws of fastening of a cover of the cylinder of the lock. Delay a cover on the right side from sheet and disconnect it from an aperture. Take out a cover sideways from directing and remove.
5 Rasstykujte a socket-1.

6 Remove blocking-2 and disconnect draught-3 at the lock cylinder.
7 Turn out screws-5.
8 Turn the lock cylinder to the right so that the directing stood in sheet cuts, then remove the cylinder downwards.
9 Rasstykujte a socket at the lock of a cover of a luggage carrier.

10 Turn away screws of fastening of the lock in a cover of a luggage carrier and take out through an aperture in sheet.

11 Disconnect blocking of draught of a drive, disconnect draught and take out the lock.


 INSTALLATION

12 Connect draught to the lock, connect blocking.
13 Insert the lock and fix its screws. Join a socket.
14 Insert the lock cylinder into body cuts, turn on the left and fix. If the lock cylinder is replaced, replace the rubber plug in a luggage carrier cover.

Check up lock and cylinder work at an open cover of a luggage carrier.

15 Connect the lock to draught of a drive, restore blocking.
16 Join a socket.
17 Enter a cover of the cylinder of the lock at the left in directing, press on the right and latch. Fix a cover two screws.
18 Connect electric wires of a back lantern at a cover.
19 Establish the holder of a lamp of a back lantern, address to Section Replacement of lamps накаливания external illumination.
20 Establish facing of a cover of a luggage carrier, address to Section Removal and installation of facing of a cover of a luggage carrier.