BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
+ Cars BMW 3 (Е46)
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   The general information and security measures
   + Leaving and repair of damages of a body
   - External elements of a body
      Removal and installation of a forward bumper
      Removal and installation/check of shock-absorbers of a bumper
      Removal and installation of a back bumper
      Removal and installation of the back shock-absorber
      Removal and cover installation обтекателя
      Removal and installation of a forward wing
      Removal and cowl installation
      Cowl adjustment
      Removal and installation of a cover of a luggage carrier
      Adjustment of a cover of a luggage carrier
      Removal and installation of the lock/cylinder of the lock of a cover of a luggage carrier
      Removal and installation газонаполненного an emphasis of a cowl/cover of a luggage carrier
      Replacement молдингов and model emblems
      Removal, installation and door adjustment
      Removal and installation of facing of a door
      Removal and installation of the lock of a door
      Removal and installation of the cylinder of the lock
      Removal and installation of the external handle of a door
      Removal, installation and window adjustment
      Removal and installation electric стеклоподъемника
      Removal and electric motor installation стеклоподъемника
      Removal and installation of a mirror of an external kind / a sound signal of a high-pitch tone
      Removal and installation of glass of a mirror
      Removal and installation of the case of a mirror of an exterior
   + Internal elements of a body
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation electric стеклоподъемника

 REMOVAL

1 Remove facing of a door and a door cover in a back part, address to corresponding section.
2 Turn away screws of fastening of glass to стеклоподъемнику, displace glass completely upwards and fix two wedges from within.
3 Turn away a nut-2 and-3 fastenings of the back tyre стеклоподъемника-1. Preliminary remove hermetic from a nut-3.
4 Take out the tyre back стеклоподъемника inside downwards and put in doors.

5 Cut off a collar of a cable-1.

6 Take out a clip-2.
7 Rasstykujte a socket-3.
8 Turn away a nut-4 and-5.
9 Take out the forward tyre стеклоподъемника-6 with the electric motor-7 inside downwards and put below in doors.
10 Take out стеклоподъемник from a door. Thus at first take out a forward part through an aperture in door sheet.


 INSTALLATION

11 Insert стеклоподъемник into a door and displace a finger through an aperture in door sheet.
12 Fix стеклоподъемник the moment 8 Н•м. Behind on the bottom nut put hermetic.
13 Join a socket at the electric motor.
14 Fix a clip for directing a cable on door sheet.
15 Fix top directing with a new collar of a cable on door sheet.
16 Fix glass screws and adjust, address to corresponding section.
17 Establish door facing, address to corresponding section.