BMW 3 series E46

Since 1998 of release

Repair and car operation

The BMW of 3 series Е46
- Cars BMW 3 (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, the tool and the workplace equipment
   Поддомкрачивание and towage
   Start of the engine from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile химикалии, oils and greasings
   Diagnostics of malfunctions
   Controls and operation receptions
   Controls and devices
   Keys, the uniform lock and anticreeping system
   Security сигнализация*
   The hatch with podemno-sdvizhnoj крышкой*
   Adjustment of position of a steering wheel
   Safety systems
   The lock of ignition and engine start
   Lay brake
   Manual box of a gear change (manual transmission)
   Automatic transmission (АТ) *
   The lever of the switch of indexes of turn / a light signal
   Screen wipers and стеклоомыватели
   Heater of back glass
   Темпостат (automatics of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilisation of stability with a regulator of a twisting moment of engine ASC+T/System of the dynamic control of stability DSC*
   The monitoring system of pressure of air in tyres (RDC) *
   Illumination and light devices
   Heater, ventilation and the conditioner of air of salon
   The salon equipment
   Features of driving of the car
   The Katalitichesky converter
   Antiblocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage spaces
   Automobile телефон*
   Readjustment of headlights
   Unlocking of a cover of the refuelling hatch manually
   Drive podemno-sdvizhnoj hatch covers вручную*
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ manual transmission and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes

Screen wipers and стеклоомыватели

0 Starting position (screen wipers do not work).

1 Work of screen wipers in an interval mode / the intensity gauge дождя*.

2 Work of screen wipers with a normal rate.

3 Work of screen wipers with the raised frequency.

4 Single inclusion of screen wipers.

5 Work стеклоомывателей in an automatic mode.

6 Regulator of an interval of inclusion of screen wipers at work in an interval mode / sensitivity of the gauge of intensity of a rain.

1 Interval mode or the intensity gauge дождя*

Interval mode

The interval between inclusions can be regulated in steps by the corrugated castor 6 having four positions. In addition the inclusion interval is automatically regulated depending on actual speed of movement.

The gauge of intensity of a rain

The gauge allows to regulate automatically frequency of work of screen wipers depending on intensity of a rain or a snowfall. It means that at the included gauge you should not care of inclusion any more both deenergizing of screen wipers and switching from one mode of their work on another. You can concentrate the attention to road completely. It is especially important under bad weather conditions and promotes большей to traffic safety and increase of convenience of driving.

If screen wipers are included on an interval operating mode they react at once, if, for example, on a windscreen of your car water from under wheels ahead of the going car has got.

The infra-red radiator directs through optical system light on a windscreen surface in such a manner that at dry glass this light is reflected completely. The gauge measures intensity of reflected light.

If has flown down it is covered by water drops reflexion degree decreases as infra-red light partially passes through glass. Intensity of reflected light allows to define degree of humidifying of a windscreen.

Gauge inclusion

After ignition key turn in position 1 or 2 translate the lever switch in position 1. There will be a single operation of screen wipers.

You can leave for long time the lever switch in position 1, and then to you will be enough the ambassador of turn of the ignition key in position 1
To include the gauge of intensity of a rain. For this purpose:

- Turn corrugated a castor 6 or
- Involve an automatic operating mode стеклоомывателей.

The corrugated castor 6 will allow you to regulate sensitivity of the gauge according to your wishes.

At journey of jet washers disconnect the gauge as inadvertent operation of screen wipers can lead to their breakage.

2 Work of screen wipers with a normal rate

At a car stop there is an automatic switching on an interval operating mode (it does not concern cars with the gauge of intensity of a rain).

3 Work of screen wipers with the raised frequency

At a stop of the car screen wipers work with a normal rate (it does not concern cars with the gauge of intensity of a rain).

5 Work стеклоомывателей in an automatic mode

Spraying of a windscreen by washing liquid is accompanied by short-term inclusion of screen wipers.

Short-term influence on the lever switch the washing liquid moves on a windscreen, but screen wipers do not join.

Washers фар*

If devices of illumination of the car at every fifth operation of washers of a windscreen in an automatic mode there is an automatic washing of headlights are included.

In order to avoid visibility deterioration it is necessary to use washers only in the event that freezing of a washing liquid on a windscreen is excluded.
Use a special nonfreezing liquid.

In order to avoid pump damage стеклоомывателей it cannot be included in the absence of a liquid in the tank.

Atomizers стеклоомывателей

Heating is carried out automatically * if the ignition key is thus in position 2.