BMW 3 series E46

Since 1998 of release

Repair and car operation



The BMW of 3 series Е46
- Cars BMW 3 (Е46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, the tool and the workplace equipment
   Поддомкрачивание and towage
   Start of the engine from the auxiliary power supply
   Checks of readiness of the car to operation
   Automobile химикалии, oils and greasings
   Diagnostics of malfunctions
   Controls and operation receptions
   Controls and devices
   Refuelling
   Keys, the uniform lock and anticreeping system
   Security сигнализация*
   Стеклоподъемники
   The hatch with podemno-sdvizhnoj крышкой*
   Seats
   Adjustment of position of a steering wheel
   Mirrors
   Safety systems
   The lock of ignition and engine start
   Lay brake
   Manual box of a gear change (РКПП)
   Automatic transmission (АТ) *
   The lever of the switch of indexes of turn / a light signal
   Screen wipers and стеклоомыватели
   Heater of back glass
   Темпостат (automatics of maintenance of the set speed) *
   The alarm system of emergency rapprochement at a parking (PDC) *
   System of automatic stabilisation of stability with a regulator of a twisting moment of engine ASC+T/System of the dynamic control of stability DSC*
   The monitoring system of pressure of air in tyres (RDC) *
   Illumination and light devices
   Heater, ventilation and the conditioner of air of salon
   The salon equipment
   Обкатка
   Features of driving of the car
   The Katalitichesky converter
   Antiblocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage spaces
   Automobile телефон*
   Readjustment of headlights
   Cowl
   Unlocking of a cover of the refuelling hatch manually
   Drive podemno-sdvizhnoj hatch covers вручную*
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ РКПП and трансмиссионная a line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electric equipment schemes





Seats

By working out of seats the advanced methods were used.

The strengthened bearing design of seats provides together with seat belts, terminators and натяжителями belts and, certainly, inflatable pillows the highest level of safety. Thanks to multilayered structure наполнителя ergonomic seats, to high percentage of natural fibres and difficult internal system of ventilation of a seat, the person during movement - and even on long trips - feels расслабленно and does not get tired. The lumbar support provides optimum position of a backbone.

Adjustment of seats

For the sake of your personal security observe following rules of adjustment of seats.

Do not regulate a seat of the driver on the move. Its unexpected displacement can cause control loss over the car and lead to failure.

The seat belt should as it is possible to adjoin to a body more densely. Otherwise at head-on collisions the zone belt can come off upwards on hips and injure the bottom part of a stomach. Besides at leaky adjoining belt its keeping effect is realised with delay.

It is inadmissible, that during movement of the car the back of a forward seat has been rejected far back (it concerns first of all a passenger seat) as thus in case of failure there is a danger “выскальзывания” the person under a seat belt which cannot execute the protective function.

Seat with manual adjustment


1 Longitudinal adjustment

Having pulled for the handle, shift a seat in position convenient for.
Having released the handle, slightly shake a seat forward-back that it has reliably stopped.

2 Adjustment on height

Having pulled for the handle, adjust seat height, loading a pillow with a body weight or half-rising from it.


3 Adjustment of a back

Having pulled for the handle, adjust a back inclination, leaning back on it or moving forward.

Correct landing

For unloading позвоночных disks sit down with the maximum shift back, leaning all back against a seat back. Ideal the pose at which the head settles down on one straight line with a backbone is considered.

To reduce pressure of muscles at distant trips, it is possible to increase a back inclination some. Thus driving possibility when lying on the highest point of a wheel of a hand are slightly bent in elbows, however, should remain.

After seat adjustment make seat belt adjustment on height, address to Section of System of safety.

Headrests

Adjustment

Headrests can be regulated on height, extending them from nests or pushing back.

For transfer of headrests in the lowermost position press the button 1.

The inclination of headrests of forward seats can be regulated turn round a horizontal axis.

Headrests weaken traumatic consequences of failures for cervical vertebras.

The middle of headrests should settle down approximately at level of ears.


Removal

Extend a headrest against the stop upwards.

Press the button (it is shown by an arrow) and remove a headrest.


Installation

Press the button (it is shown by an arrow) and insert a headrest into the directing.

Adjust headrest position.

Firm seat sports типа*

This seat has an additional possibility of adjustment of an angle of slope of a pillow and a popliteal support.

1 Inclination upwards:
Pull for the handle upwards some times while the pillow of a seat will not occupy position convenient for you.

2 Inclination downwards:
Press the handle some times while the pillow of a seat will not occupy position convenient for you.

3 Popliteal support:
Having pulled for the handle result a popliteal support in position convenient for you.


Lumbar опора*

The back contour can change so that its acting part was entered in a hollow of lumbar department of a backbone, creating a support for it.

Thus, the support of the top department of a basin and a backbone, promoting correct and free landing is provided.

Pressing the switch in front or behind reaches accordingly increase or reduction of camber of a contour of a back.

By pressing the top or bottom part of the switch camber of the top or bottom part of a lumbar support increases.


Seat with the adjustment electric drive положения*

1 Longitudinal adjustment of a seat.
2 Adjustment of a seat on height.
3 Adjustment of an inclination of a back.

Headrest adjustment is made manually.

For the sake of your personal security observe instructions on the adjustment, resulted above in this Section.


Firm seat of sports type

1 Adjustment of an angle of slope of a pillow.
2 Longitudinal adjustment of a seat.
3 Adjustment of a seat on height.
4 Adjustment of an inclination of a back.

Adjustment of a headrest and popliteal support is made manually.

For the sake of your safety observe instructions on the adjustment, resulted above in this Section.


Memory of adjustments сиденья*

Storing and reproduction to three variants of adjustment of a seat is possible.

The device does not remember position of a lumbar support.


Storing

1 Having inserted a key into the ignition lock, turn it in position 1 or 2.
2 Adjust a seat, having established it in position convenient for.
3 Press key Memory ("Memory"). The control lamp built in in it Thus will light up.
4 Press at own discretion a key 1, 2 or 3. Thus the control lamp will go out.

Reproduction

The ignition key in position 1:

Press, without keeping, the necessary key (1, 2 or 3).

At influence on any switch of adjustment of a seat or by pressing one of keys of memory installation process will immediately interrupt.
The door of the driver is closed, and a key in the ignition lock will turn in position 0 or 2 or in general will take out from it:

(1, 2 or 3) it is necessary to keep the necessary key pressed to full end of process of installation.

Casually having pressed key MEMORY, press it once again that the control lamp has gone out.

Do not include function of reproduction during movement as unexpected displacement of a seat can become a cause of accident.

# You can so to adjust the car that at its unlocking by means of remote control of your personal key the seat will automatically occupy position convenient for you.

If the memory block in a key before car unlocking be convinced that space behind a seat of the driver freely is used. Otherwise at seat displacement damage of subjects being on a floor back is possible.